Elma CR15
1.5 t carrier capacity · 775 mm base width · 44 mm ground clearance
Explore the CR15Elma tracked carrier attachment
Glass transport kit
The Elma glass transport kit is an inclined rack within the tracked carrier attachment range. Published kit capacities range from 1,375 kg to 2,875 kg depending on configuration. The rack weighs 125 kg, inclines at 10° and requires a fixed or rotating platform. Confirm the complete configuration with the supplier.
Put the attachment to work
Move the glass. Free up the crew.
A tracked glass trolley carries supported panels with powered travel and radio control from the base carrier. It gives glazing and window-installation businesses a way to reduce repeated hand-carrying between material storage and the work area.
For glazing teams comparing glass sheet handling equipment, the rack dimensions matter alongside the carrier width. The full structure measures 199 × 76 × 140 cm; panels and load restraints can change the space needed.
Attachment reference figures.
Published figures can vary by configuration. Ask the supplier to confirm model compatibility, fittings and the figures applicable to the supplied setup.
| Published rating | 1,375 kg / 2,875 kg, configuration-dependent |
|---|---|
| Dimensions / movement | 199 × 76 × 140 cm; 10° inclination |
| Attachment weight | 125 kg attachment weight |
Manufacturer figures are shown for reference. Model compatibility, fittings, final configuration and working capacity should be confirmed with the supplier. Attachment ratings do not increase the base carrier limit.
Explore the carrier range.
Compare the base machines. Attachment compatibility is subject to supplier confirmation.
Quick answers
Frequently asked questions
What is a tracked glass trolley?
A tracked glass trolley is a tracked carrier fitted with a rack to support glass during transport. The Elma glass transport kit combines an inclined rack with a compatible CR carrier.
What can the Elma glass transport kit carry?
Elma publishes kit capacities of 1,375 kg and 2,875 kg for different configurations. The supplier must confirm which figure applies to the complete machine and attachment being supplied.
Can a glass carrier move panels through a single door?
A glass carrier needs an opening that accommodates the complete rack, panels and carrier with suitable clearance. The rack is 76 cm wide, but the CR30 is 795 mm wide and the CR30-H is 920 mm; check your actual opening.
Does the glass rack need another attachment?
Elma describes the glass rack as requiring a fixed or rotating platform. Confirm model compatibility, fittings and working capacity with the supplier.
Is the glass transport kit a vacuum glass lifter?
The Elma glass transport kit is shown here as a rack for transporting supported glass sheets. Its published rack figures do not describe vacuum lifting or a glass installation robot.
Manufacturer documents
Keep the details to hand.
Specifications, dimensions and attachment configurations from Elma, available here.
Download Elma CR Series brochure (PDF)The CR Series PDF is an extract of the original catalogue, printed pages 4–11.